Pepwave PoE Injector

Pepwave PoE Injector


  • Comply with IEEE 802.3af Power Over Ethernet Standard
  • Cost Saving, No Power Cabling for WLAN AP, IP Phone and any supported IEEE802.3af Powered Device
  • Supplies power to PD device up to 15.4 watts per port, meeting IEEE 802.3af standards and more sufficiently is able to provide power to PD devices
  • Auto-Sensing Algorithm-Automatically detecting Power-over-Ethernet terminals and supplying inline power
  • Advanced Auto-Sensing Algorithm giving power only to 802.3af end device
  • Small lightweight plastic enclosure
  • Built-in universal AC switching power supply
  • Standard RJ45 Cat.5 Ethernet data input and output
  • Easy, convenient, and simple to use

 

Specification
Standard · IEEE 802.3 10BASE-T
· IEEE 802.3u 100BASE-TX
· IEEE 802.3af Power Over Ethernet
Network Media · 10BASE-T Ethernet: UTP Cat. 3,4,5, Unshielded Twisted Pair(UTP) Cable
· 100BASE-TX Fast Ethernet: UTP Cat. 3,4,5, Unshielded Twisted Pair(UTP) Cable
Protocol · CMSA/CD
Topology · Star
Number of Ports · One LAN-IIN port (Data only) and one LAN-out port (Data+Power)
Input Power requirement · AC Input voltage : 90-264VAC
· AC Frequency : 47-63Hz
· AC Input Current : 2A at 100VAC, 1A at 240VAC, (-48VDC)
Power over LAN output · Pin assignment and polarity : (+) 4/5 (-)7/8
· Output voltage : aggregate power : 50W (48VDC)
Diagnostic LEDs · AC Power (Green)
· Power Active (Red)
· Over current Protection (Red Flashing)
Dimensions
(W x H x D) 		5.0 x 3.5 x 11.8 cm
Weight 0.14kg
Temperature

· Operating : 0 ~ 40°C
· Storage : -25 ~ 80°C

Humidity · Operating : 10% ~ 90% RH
· Storage : 5% ~ 95% RH
Safety

UL 1950 / CSA A22.2 No. 950 / EN60950/ CB /CE
Learn more about Pepwave PoE Injector here. Search our Knowledge Base for first hand response on Pepwave PoE Injector technical issues.
Search Knowledge Base